>
Abstract This is my current display-project. I'm trying to create a truely covered Kopin 320M Display-hack.
I started using one of the RS170 -eval-kits.
Specification The display has 320x240 grayscale-pixels.
There is a very flexible 4-wire cable comming in
with GND, +5V, Composite-Video(ntsc but I'll switch to PAL to be able to atach the video-recorder/...)
The 4rth line is currently GND but will later be for a microphone in the other arm.
Status DONE:
- it works
- electronics work
- holes for cabling and display are there
- position and calibrate the mirror permanently
- cut the edges of the lens to fit my face
- permanantly atach the driver-electronics
- make a better plug for the display-cable
- "paint it black" (tm)
- backlight should be more diffuse
- save 0.5-2.0mm display-thickness
A close-up of the Kopin-display. Yes I removed everything. This is just the bare silicium and 2 tiny glass-plates.
older images
This is how it is ment to look later. (plus lens and mirror.)
This is my first backlight-assembly. It turned out ot be much too dark.
*****
-- MarcusWolschon - 15 Feb 2002