Image of Seven of Nine's ocular implant Wearforge Wearables Wiki Powered by TWiki collaboration software
MainTWikiWearsoftWearhardWearforeTest
Home | Changes | Index | Search | Go
You're in Wearforge -> Wearhard -> BoserHS?-1600

Boser HS-1600


General Information

Manufacturer Information Page

You can find Boser's info on this board at the following URL:

Summary

A TransmetaCrusoe? SBC with onboard VGA, 4x SerialPort?s, Audio, USB, and LAN. Expandable through MiniPCI?. Uses about 5W power.

Specifications

[ Copied wholesale from the Boser website - MichaelLeuchtenburg ]
  • CPU: TransmetaCrusoe? TM3200? 400MHz / TM5400 600MHz / TM5800 800MHz CPU
  • Bus Interface: MiniPCI? Local Bus
  • Memory: One SO-DIMM? socket supporting up to 256MB
  • Chipset: VIA VT82C686
  • VGA: C&T 69000? with 2MB memory supporting CRT/Panel displays up to 1280x1024 at 256 colors
  • IDE: Two IDE disk drives supporting ATA/33 and with a transfer rate of up to 33MB/sec.
  • FDD: Supports one floppy disk drive (pin-header on solder side)
  • Parallel: One enhanced bi-directional parallel port supporting SPP/ECP/EPP
  • LAN: RealTek RTL8139 10/100 Based LAN
  • Audio: Audio: ESS Solo1 3D audio controller
  • Serial Port: 16C550 UART-compatible RS-232/422/485 x 1 and RS-232 x 3 serial ports with 16-byte FIFO
  • IrDA: One IrDA? TX/RX header
  • USB: Two USB ports
  • Keyboard/Mouse: 6-pin header
  • DiskOnChip: DiskOnChip? socket supporting memory size of up to 288MB
  • BIOS: Award PnP? Flash BIOS
  • CMOS: Battery backup
  • DMA Channels: 7
  • Interrupt Levels: 15
  • Main Power: Single +5V power in
  • Maximum Power Consumption: +5V@1A
  • Operating Temperature: 0~60°C
  • Board Size: 11.25 x 10.2 cm

-- MichaelLeuchtenburg - 01 Jul 2002

Things to do in BoserHS?-1600: Edit | Attach | Ref-By | Printable | Diffs | r1.1 | More
BoserHS-1600
r1.1 - 02 Jul 2002 - 04:19 GMT - MichaelLeuchtenburg
Copyright © 2002 by the contributing authors. All material on this collaboration tool is the property of the contributing authors.
Ideas, requests, problems regarding Wearforge? Send feedback.